
                        Troubleshooting
                        ===============
Mouse Driver:

The setup program warns about a missing mouse driver, or the
main program FUTURE terminates with a similar error message.

As most games, FUTURE needs an active mouse driver. You should
find a mouse driver together with your operating system or with
your mouse. Run this driver from your AUTOEXEC.BAT file or
manually BEFORE you run FUTURE.



Memory requirements:

If your computer has only 8 MB main memory and you use Windows95,
there may be not enough memory left in a MS-DOS prompt.

You recognize this because:

1.) The sound is playing with interrupts.
2.) FUTURE terminates with an error message.

You can solve this problem by assigning more DPMI memory to your
MS-DOS prompt. See your Windows 95 documentation on how to do 
this.



Not enough memory with MS-DOS:

Future needs about 7.1 MB free extended memory. The MEM command can
show the free memory currently available on your computer. If your 
computer has 8MB or more but the MEM command displays less then 
7.1 MB free memory, there are the following solutions:

1.) Deactivate cache programs like SMARTDRIVE in your AUTOEXEC.BAT
    and CONFIG.SYS files. Use the MS-DOS command EDIT to add the
    word REM at the start of lines referring these programs.
2.) Deactivate memory managers like EMM386 in your CONFIG.SYS file.
3.) Deactivate other programs which might use extended memory.
4.) If all else fails, disable the sound. This should be only necessary
    if you really need to start other programs which use extended 
    memory.
    


Display - VESA drivers:

The program is terminated and warns about a problem with recognizing
your Graphics adapter (VESA mode, UNIVBE or Display Doctor are part of 
the message). 

FUTURE needs a VESA driver version 1.2. More recent drivers
(VESA 2.0 and above) do work, but VESA 1.2 has been available
since many years.

If there is no VESA driver installed on your computer, FUTURE uses
UNIVBE (Display Doctor) from Sci-tech (Internet 
http://www.scitechsoft.com).

If there are problems with the automatic VESA installation, you can
change the procedure by specifying parameters when running FUTURE.

"FUTURE -nounivbe"
   runs FUTURE but only scans for already available VESA drivers.
   You can use this command if there are problems with UNIVBE.
   
"FUTURE -vesadefect"
   the UNIVBE driver is used even if there is already a VESA driver
   active. You can use this command if your normal VESA BIOS is
   not working correctly (e.g. wrong color palette).
   
"FUTURE -modecheck"
   UNIVBE checks your graphics adapter to get more information about
   graphics modes. This is necessary if UNIVBE can't find a driver
   for your adaptar otherwise.
   ATTENTION: UNIVBE starts a test of your graphics adaptar which
              might under very rare circumstances damage your
              monitor. Therefore, switch OFF your monitor after
              running FUTURE with this parameter and having read
              the following warning message.
              Hit the RETURN key and wait for about 30 seconds.
              Switch on your monitor again.
      
              This test procedure is only run on the first start
              of the program with this parameter.
      
=== THE END ===
